• 4.3 oz./yd², 100% combed ringspun cotton
• Heather Grey is 90/10 ringspun cotton/polyester
• 100% cotton thread on color white
• Relaxed fit
• 7/8" non-topstitched collar
• Taped neck and shoulders
• 1” double-needle sleeve and bottom hems
• Side seams
• Made in the USA of US and foreign components

• 3.2 oz./yd², 100% recycled polyester
• Water repellant
• Top panel heather woven fabric
• Zipper enclosure
• Two front pockets
• Elastic bungee cord bottom hem
• adidas logo on back neck

• 600D polyester
• Padded laptop sleeve fits up to a 15", shoulder straps and back panel
• Mesh water bottle pockets
• Fleece-lined padded eyewear/media pocket

• 2.5 oz./yd², 100% nylon 2L Full Dull plain weave
• 100% polyester fine-mesh lining
• Omni-Tech™ coated waterproof/breathable; fully seam sealed
• Attached, adjustable storm hood
• Abrasion-resistant chin guard
• Zippered hand pockets
• Adjustable cuffs
• Adjustable drawcord hem
• Reflective detail
• Packable into hand pocket

• Cotton/polyester blend
• Structured, mid-profile, six-panel
• Precurved visor, solid undervisor
• Camouflage patterns may feature brand logos 
• Adjustable plastic snapback closure

Caps with PINK coloring are only available in SMALL size (Women's fit)

• 100% polyester heathered softshell
• 100% polyester Omni-Heat™ thermal reflective lining
• Thermarator™ Insulation
• Water-resistant fabric
• Adjustable drawcord in hood and hem
• Zippered hand pockets

• 2.5 oz./yd² (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 1680D dobby polyester
• Padded adjustable, ventilated shoulder straps, top carry handle
• Ventilated back panel
• Main zipper compartment with laptop sleeve, fits most 15” laptops
• Front zippered pocket with organizer pocket
• Small zippered accessory pocket, top front of bag
• Top carry handle
• Puma logo on front pocket

• 100% polyester contour softshell
• Wind- and water-resistant
• Abrasion-resistant chin guard
• Zippered hand and chest pockets
• Adjustable cuff tabs
• Adjustable drawcord hem

• 600D polyester
• Padded laptop sleeve with separate side access (holds up to a 15" device)
• Padded shoulder straps and back panel
• Front pocket with internal organization panel
• Fleece-lined padded eyewear/media pocket 

• 5.4 oz./yd² (US), 9 oz./L yd (CA), cotton/polyester CVC fabric
• Two flap pockets with button closure
• Roll-tab sleeves with adjustable one-button cuffs
• Half back yoke
• Black neck tape

• 5.3 oz./yd², 100% pre-shrunk heavyweight cotton
• Double-needle stitched neckline and sleeves
• Shoulder-to-shoulder taping

• 3.5 oz./yd², 100% cotton garment-dyed slub
• Contains organic and recycled materials
• Loose and flowy fit
• Slight raw edge
• Inside out detailing

• 5.5 oz./yd², US grown, 100% ringspun cotton
• Double-needle coverstitched
• Twill neck tape
• Ribbed set-in collar
• Shoulder to shoulder tape
• 3/4" hems
• Twill label

• 7.4 oz./yd², 100% polyester MTR filament fleece
• Zippered hand pockets

• 3.8 oz./yd² (US), 6.4 oz./L yd (CA), 100% polyester piqué
• Moisture management properties
• Self-fabric collar with three button placket
• Contrast 3-stripes screen print on right sleeve
• Heather colorblock on upper chest, back and shoulders
• Contrast adidas® logo at back neck to match 3 stripes on sleeve
• UPF 30+ protection

To our Canadian customers: Please note adidas products cannot be exported internationally. Consult our Terms and Conditions section for more information.

• 100% bio-washed chino twill
• Unstructured, six-panel, low-profile
• Pre-curved visor
• Self-fabric tri-glide buckle closure - antique brass
• Tear away label

**Please click on color swatches to view actual images of each hat's unique color combination

• Cotton/Polyester blend 
• Acrylic interior lining

• 100% sublimated polyester moisture management/ antimicrobial performance fabric
• Badger sport shoulder for maximum movement
• Self-fabric collar
• Double-needle stitched hem
• Badger heat transfer logo on left sleeve

*Printing on Sublimated Fabric: Printing over sublimated fabric can be achieved with ease, it’s always best to contact your ink manufacturer before printing. An underbase is recommended with all inks. When curing ink do NOT exceed 320 degrees. Heat transfers are NOT recommended.

Designs: Designs with less fill and darker ink colors work best to block the pattern, lighter inks may allow the digital pattern to show through. Bold lines are recommended, fine lines will disappear into the pattern.

• Brushed cotton/polyester blend
• Structured, six-panel, mid-to-low profile
• Pre-curved visor with black undervisor
• Sewn eyelets
• Hook-and-loop closure

• 8.9 oz./yd², 100% polyester two-toned Sherpa
• Self fabric collar dyed to match stitching
• Half moon back yoke
• Twill tape inside neck trim
• Quarter-zip
• Woven patch label

Q10 is transitioning to style BM8510

The dye process used to produce this garment infuses each with unique character. Please allow for color variations in productions.

• 60/40 cotton/polyester
• 100% polyester mesh back
• Structured, six-panel, mid-profile
• Pre-curved contrast stitched visor
• Underbill matches the color of visor
• Adjustable plastic snapback